This original BabyYarnie crochet halloween hanging mobile – ghosts, bats & pumpkins is designed independently as a practical crochet baby project with explicit stitch counts, measured checkpoints, and clear finishing. The instructions use US terms and keep every construction decision visible so the finished piece can be checked before use or gifting.
A long three-stitch-per-chain ribbon forms the dramatic black spiral. The moon, stars, ghosts, bats, and pumpkins are crocheted separately, embroidered without plastic features, and suspended from six measured cords around a wrapped 10-inch ring so the arrangement balances without copying the reference design.
Pattern Details
- Hook Size: 3.5 mm
- Finished Size: Approximately 10 inches wide × 32 inches long, excluding the ceiling hook
- Gauge: 18 sc and 20 rows = 4 inches; exact motif gauge is less important than firm, even fabric
- Terminology: US
- Estimated Time: 10–14 hours
- Construction: One wrapped 10-inch ring, one 180-chain corkscrew spiral, one crescent moon, three stars, three ghosts, three bats, three pumpkins, and six measured hanging cords with securely knotted wooden beads.
- Skill level: Intermediate
Why You’ll Love This Project
The construction is repetitive enough for a relaxed crochet session while the measured checkpoints help prevent size drift. A washable, smooth yarn keeps the stitches easy to inspect and gives the finished baby project a soft, tidy appearance.
Materials
- Approximately 430 yards black DK cotton yarn for the wrapped ring, spiral, bats, and cords
- Approximately 110 yards white DK cotton yarn for three ghosts
- Approximately 100 yards orange DK cotton yarn plus 15 yards green for three pumpkins and stems
- Approximately 80 yards muted-gold DK cotton yarn for the moon and stars
- 3.5 mm crochet hook
- One smooth 10-inch metal craft ring
- Eighteen 12 mm unfinished wooden beads painted black or muted gold with non-toxic craft paint
- Small amount of washable polyester stuffing
- Black, gold, and dark-brown embroidery yarn
- Twelve locking stitch markers
- Tape measure, yarn needle, embroidery needle, and scissors
- One wall- or ceiling-rated closed hook suitable for the installation surface

Gauge, Measurements, and Planning
The 180-chain foundation should measure about 34 inches before curling. The finished ghosts and pumpkins should measure 2.5–3 inches, and each bat should span about 4 inches. Keep all amigurumi stitches tight enough that stuffing cannot show.
Make and wash a gauge swatch before beginning. Measure only after the swatch is completely dry. If the stitch width differs, change hook size rather than pulling the working yarn tighter. Keep a written count at the end of every section so the finished edges remain balanced and the assembly points line up.
Abbreviations and Special Stitches
- ch: chain
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- tr: treble crochet
- sl st: slip stitch
- st(s): stitch(es)
- rnd: round
- inc: work 2 sc in one stitch
- dec: single crochet two together
Special stitch guidance: Corkscrew ribbon: work 3 hdc in every foundation chain; the concentrated increases make the strip coil naturally. Star point: from a 10-stitch center, sl st in the next stitch, ch 5, then sl st in second chain, sc in next chain, hdc in next chain, dc in final chain, and sl st in the following center stitch.
Important Notes
- Decorative hanging item only. Hang securely and completely out of reach of babies and young children; do not place inside or directly over a crib.
- Use a closed, load-rated hook and inspect the ring, suspension loop, cords, knots, beads, and every sewn motif before display.
- Embroider all faces; do not use safety eyes, buttons, bells, or glued facial pieces.
- The wooden beads are decorative small parts. Knot securely above and below every bead and keep the complete mobile permanently inaccessible to children.
- Beginning chains do not count as stitches unless an instruction says otherwise. Mark the first stitch of every round.
Complete Instructions for Crochet Halloween Hanging Mobile – Ghosts, Bats & Pumpkins
Wrap the Ring and Crochet the Black Spiral
Prepare the hanging structure first so every later cord can be measured against it.
- Wrap the 10-inch ring closely with black yarn, pushing each wrap beside the last so no metal shows. Knot the yarn, weave the tail under at least 2 inches of wraps, and secure the end with several sewn stitches.
- Spiral Foundation: Ch 181 loosely. Skip the first chain to leave 180 working chain positions. (180 sts)
- Spiral Row: Beginning in the second chain from the hook, work 3 hdc in every working chain. (540 sts)
- Allow the strip to coil naturally as you work. Fasten off with a 20-inch tail; do not steam or flatten the curl.
- Sew the top end of the spiral to the ring at four neighboring wrap points. Stretch it gently to about 26 inches and leave the lower tail free for a star attachment.
- Make three equal 18-inch black suspension chains. Attach them at evenly spaced points on the ring, join their upper ends into one closed loop, and pull-test the structure.

Crochet the Crescent Moon and Three Stars
Use muted gold and work tightly so the shapes remain crisp.
- Moon Rnd 1: Make 6 sc in a magic ring. Continue in a spiral. (6 sts)
- Moon Rnds 2–5: Increase evenly to 12, 18, 24, then 30 stitches. Fasten off, flatten the circle, fold about one third of it behind the front layer, and sew a smooth inner curve through both layers to create a crescent. Add a tiny amount of stuffing only along the outer curve and close completely.
- Star Center: Make 10 sc in a magic ring and join. Work the star-point sequence five times, using two center stitches per point. Fasten off and block to about 3 inches point to point.
- Make three identical stars. Reinforce the top point of each with several hidden stitches before attaching a hanging cord.
- Sew the crescent to the front of the wrapped ring and place two stars beside it. Reserve the third star for the bottom of the spiral.

Make Three Mini Ghosts
Work each ghost from the head downward and embroider the face before closing.
- Ghost Rnd 1: With white, make 6 sc in a magic ring. (6 sts)
- Ghost Rnds 2–3: Increase evenly to 12, then 18 stitches. (18 sts)
- Ghost Rnds 4–9: Sc in every stitch. (18 sts)
- Embroider two black oval eyes and a small mouth. Stuff lightly, keeping the lower edge flat.
- Ghost Rnd 10: Repeat [sc in next stitch, dec] six times. (12 sts)
- For the wavy base, repeat [sl st in next stitch, 3 dc in next stitch] six times. Join and fasten off. For each arm, join white at the side, ch 4, sl st back along the chain, and secure to the body.
- Make three ghosts and pull-test every embroidered feature and arm.
Make Three Bats and Three Jack-o’-Lantern Pumpkins
Complete every named motif before beginning final assembly.
- Bat Body: With black, make 6 sc in a magic ring, increase to 12 stitches, work 3 rounds even, then decrease to 6. Stuff lightly and close. Join at the top twice to make two [ch 3, sl st in second and third chains] ears.
- Bat Wings: Ch 10. Beginning in the second chain, work sl st, sc, hdc, dc, tr, dc, hdc, sc, sl st. Make six wings total, turn half over for mirror images, and sew one pair securely to each of three bodies. Embroider small gold eyes.
- Pumpkin Rnds 1–4: With orange, make 6 sc in a magic ring and increase evenly to 12, 18, then 24 stitches.
- Pumpkin Rnds 5–9: Sc in every stitch. (24 sts)
- Embroider triangular eyes and a zigzag smile in black. Stuff firmly enough to hold shape, then decrease evenly to 18, 12, and 6 stitches; close securely.
- Thread orange yarn from top to bottom six times at equal intervals and pull gently to form pumpkin ribs. With green, ch 5, sl st back along the chain, and sew the stem at the top. Make three pumpkins.
Assemble and Balance the Hanging Mobile
Lay out the complete mobile on a flat surface and measure every cord before knotting.
- Cut six black yarn cords measuring 18, 21, 24, 27, 30, and 33 inches. Double each cord and twist it lightly for strength.
- On each cord, thread two or three painted wooden beads. Tie a tight overhand knot immediately above and below every bead so it cannot slide.
- Distribute the three ghosts, three bats, and three pumpkins across the six cords, alternating motif types and heights. Sew through each motif at least twice, knot on the back, reverse direction, and bury the tail.
- Attach the six cords at evenly spaced positions around the wrapped ring. Keep the longest decorations away from the free spiral so the pieces do not tangle.
- Sew the reserved gold star to the bottom of the spiral. Hang the mobile temporarily at adult eye level, rotate cord positions until the ring sits level, then tighten every knot and add a second securing stitch through the ring wraps.
- Install only from the rated closed hook, verify at least 3 feet of clearance from any crib or reachable furniture, and perform a firm pull test on every connection.
Assembly and Shaping
The ring carries six independently secured motif cords while the corkscrew hangs from four reinforced stitches near the center. Keep the crescent and two stars on the upper ring, place the remaining star at the spiral tip, and alternate ghosts, bats, and pumpkins so no two heavy motifs pull from the same side.
Lay every component on a flat surface before joining. Match the marked centers first, then divide each remaining edge into equal sections. Work through both layers with consistent tension and pause after each section to check that the fabric lies flat. This measured approach prevents twisting and keeps decorative details facing the intended direction.

Finishing
- Weave every yarn tail through several same-color stitches, reverse direction once, and trim only after the join passes a pull test.
- Steam-block the flat wings and stars only; do not flatten the corkscrew spiral or stuffed motifs.
- Confirm the ring remains level and every bead has an independent knot above and below it.
- Photograph the installed mobile with the safety guidance and inspect all hanging points regularly.
For a polished result, weave each tail through several same-color stitches, reverse direction once, and trim only after the fabric has been gently stretched. Block to the listed dimensions without flattening textured stitches. Inspect joins, borders, straps, and decorative pieces before the project is used or gifted.
Helpful Tips
- Use smooth cotton yarn for crisp stars, wings, and embroidered faces.
- Number the six hanging cords before assembly so their measured stagger remains easy to follow.
- If the ring tilts, move one cord a half inch around the wrapped ring rather than adding counterweights.
- Choose matte black and muted gold beads so the small accents complement rather than overpower the crochet motifs.
Good lighting and a contrasting stitch marker make counting much easier. If a section looks uneven, compare the current count with the previous checkpoint before continuing. Fixing one missed stitch early is faster than compensating later, and it preserves the measurements used by the assembly instructions.

Frequently Asked Questions
Can I hang this mobile over a crib?
No. It is decorative only and must be installed securely, completely out of reach, and never inside or directly over a crib, changing surface, or play area.
How do I keep the spiral from flattening?
Work three half double crochets into every foundation chain, allow the strip to curl naturally, and avoid pressing or steaming the finished corkscrew.
Can I replace the wooden beads?
Yes. You may omit them and use tightly crocheted knots instead. Never use loose beads, bells, or unsecured hard pieces.
Conclusion
The completed Halloween hanging mobile combines a dramatic black corkscrew with an original arrangement of a crescent moon, three stars, three ghosts, three bats, three jack-o’-lantern pumpkins, and carefully secured bead details. Measured cords, reinforced joins, and strict out-of-reach installation keep its purpose clearly decorative.
BabyYarnie Printable Crochet Pattern Card

BabyYarnie — easy-to-follow baby crochet for everyday makers.
Project: Crochet Halloween Hanging Mobile – Ghosts, Bats & Pumpkins
Skill level: Intermediate Hook: 3.5 mm Yarn: DK
Finished size: Approximately 10 inches wide × 32 inches long, excluding the ceiling hook
Card Materials
- Approximately 430 yards black DK cotton yarn for the wrapped ring, spiral, bats, and cords
- Approximately 110 yards white DK cotton yarn for three ghosts
- Approximately 100 yards orange DK cotton yarn plus 15 yards green for three pumpkins and stems
- Approximately 80 yards muted-gold DK cotton yarn for the moon and stars
- 3.5 mm crochet hook
- One smooth 10-inch metal craft ring
- Eighteen 12 mm unfinished wooden beads painted black or muted gold with non-toxic craft paint
- Small amount of washable polyester stuffing
- Black, gold, and dark-brown embroidery yarn
- Twelve locking stitch markers
- Tape measure, yarn needle, embroidery needle, and scissors
- One wall- or ceiling-rated closed hook suitable for the installation surface
Card Instructions
- Wrap the Ring and Crochet the Black Spiral: Wrap a 10-inch ring, work 3 hdc in each of 180 chains for a 540-stitch corkscrew, and add three balanced suspension chains.
- Crochet the Crescent Moon and Three Stars: Shape a lightly stuffed 30-stitch crescent and make three matching five-point stars from 10-stitch centers.
- Make Three Mini Ghosts: Make three lightly stuffed 18-stitch ghosts with embroidered faces, chain arms, and a six-scallop lower edge.
- Make Three Bats and Three Jack-o’-Lantern Pumpkins: Make three stuffed bats with mirrored wings and three 24-stitch ribbed pumpkins with embroidered jack-o’-lantern faces.
- Assemble and Balance the Hanging Mobile: Arrange six measured beaded cords around the ring, alternate all nine motifs, add the final star to the spiral, balance, secure, and pull-test.
Finish: Check every count, weave in all ends, block to measurement, and inspect each join.
