Crochet Four-Point Bunny Star Lovey – Free Pattern

This original BabyYarnie crochet bunny star lovey tutorial follows the silhouette and palette of the supplied reference as a visual brief. The stitch instructions, component engineering and wording are newly authored. Make every part in the order shown, then perform the fit and seam checks before display or gifting.

The reference is visual inspiration, not a source of usable written instructions. This complete US-terms tutorial gives countable stages for every structural component and explains how the pieces are joined.

Pattern Details

• Hook Size: 3.5 mm for DK cotton; adjust for dense head fabric
• Finished Size: Planning 15-17 in from top ears to lower star point; flat cloth about 13 in tip to tip
• Gauge: Target 19 sc and 22 rows per 4 in; swatch both colors
• Estimated Time: 9-13 hours
• Construction: 36-stitch closed pink head, two12-stitch ears with sewn mint inner panels, two12-stitch arms and cream 24-stitch center with four tapered points
• Skill level: Intermediate

Why You’ll Love This Project

A distinctive silhouette makes the finished project recognizable in one glance. Clear component counts make it possible to catch a shaping error before a seam is closed, and the finishing notes cover the details that a photo cannot teach.

Materials

• Planning allowance: 125 yd cream, 70 yd blush pink and 35 yd mint DK cotton plus swatch allowance
• 3.5 mm hook, small amount of washable stuffing for head and arms, black embroidery yarn
• Blunt needle, removable markers, scissors and ruler; no buttons or plastic eyes

Gauge, Measurements, and Planning

The 24-stitch cream center divides into four exclusive groups of six stitches. Each group becomes one point. Make a paper star template after the first point and check that all four points are equal before edging. The square loveys already published on this site use a different construction.

Make and wash a gauge swatch before beginning. Measure only after the swatch is completely dry. If the stitch width differs, change hook size rather than pulling the working yarn tighter. Keep a written count at the end of every section so the finished edges remain balanced and the assembly points line up.

Abbreviations and Special Stitches

• ch: chain
• sc: single crochet
• dc: double crochet
• sl st: slip stitch
• st(s): stitch(es)
• inc: two single crochets in one stitch
• dec: single-crochet two stitches together
• BLO: back loop only

Special stitch guidance: Invisible decrease in a spiral: insert through the front loops of the next two stitches, yarn over and pull through both front loops, yarn over and pull through the remaining two loops. For flat rows use a regular sc2tog through both loops. A turning chain and a finishing slip stitch are never counted. Unless a joined round is explicitly stated, work spirals without joining or turning.

Important Notes

• Development disclosure: stitch arithmetic and the written component sequence are checked, but no physically crocheted sample or measured gauge is claimed. Yarn amounts, sizes and times are estimates; swatch and test the fit before gifting.
• AI-generated pictures illustrate the intended appearance; they are not photographs of a tested specimen or stitch charts. Use the written counts as the construction authority.
• The supplied image is a mandatory visual design reference only. This is not the source creator’s pattern; do not copy its text, instructions, layout, logo or image pixels.
• For child-facing gifts, embroider facial details. Do not use plastic safety eyes, loose buttons, wire, glue or detachable ornaments. These items are not certified infant toys or sleep accessories.
• Mark the first counted stitch of each spiral round. For every flat row, ch 1 and turn, then place the first sc in the last stitch of the previous row. Remove temporary markers before use.

Complete Instructions for Crochet Four-Point Bunny Star Lovey

Shape the Bunny Head and Face

1. Bunny head Round 1: 6 sc into a magic ring. (6 sts) Tighten the ring, mark the first sc, and work a continuous spiral without joining or turning.
2. Round 2: inc in each stitch. (12 sts)
3. Round 3: [sc in next 1 stitches, inc in next stitch] 6 times. (18 sts)
4. Round 4: [sc in next 2 stitches, inc in next stitch] 6 times. (24 sts)
5. Round 5: [sc in next 3 stitches, inc in next stitch] 6 times. (30 sts)
6. Round 6: [sc in next 4 stitches, inc in next stitch] 6 times. (36 sts)
7. Round 7: Sc in each stitch. (36 sts)
8. Round 8: Sc in each stitch. (36 sts)
9. Round 9: Sc in each stitch. (36 sts)
10. Round 10: Sc in each stitch. (36 sts)
11. Round 11: Sc in each stitch. (36 sts)
12. Round 12: [sc in next 4 stitches, dec across next 2] 6 times. (30 sts)
13. Round 13: [sc in next 3 stitches, dec across next 2] 6 times. (24 sts)
14. Round 14: [sc in next 2 stitches, dec across next 2] 6 times. (18 sts)
15. Round 15: [sc in next 1 stitches, dec across next 2] 6 times. (12 sts)
16. Round 16: dec 6 times. (6 sts)
17. Work in blush pink. Embroider two closed eyelids between Rounds 7 and 8, seven stitches apart, and an X-shaped nose centered one round lower. Anchor the yarn on the wrong side. Stuff softly before the last decreases. Close the final six front loops. Keep the starting-ring pole facing forward.

Make and Line Two Ears

1. Outer ear Round 1: 6 sc into a magic ring. (6 sts) Tighten the ring, mark the first sc, and work a continuous spiral without joining or turning.
2. Round 2: inc in each stitch. (12 sts)
3. Rounds 3-7: Sc in each stitch. (12 sts)
4. Round 8: dec 6 times. (6 sts)
5. Make two pink outer ears. Do not stuff. Flatten each six-stitch opening into three opposing pairs; sew them shut.
6. Mint inner ear Row 1: ch 5; sc in second chain from hook and in each remaining chain. (4 sts) Ch 1 and turn; this chain never counts.
7. Rows 2-6: Sc in each stitch. (4 sts)
8. Make two mint inner panels. Sew all four edges of each flat mint panel to the front of an outer ear, stretching neither color. Pin the ear bases to the upper head between Rounds 11 and 13, spaced five head stitches apart, then sew each full three-pair base twice.

Crochet the Four-Point Cream Cloth

1. Lovey center Round 1: 6 sc into a magic ring. (6 sts) Tighten the ring, mark the first sc, and work a continuous spiral without joining or turning.
2. Round 2: inc in each stitch. (12 sts)
3. Round 3: [sc in next 1 stitches, inc in next stitch] 6 times. (18 sts)
4. Round 4: [sc in next 2 stitches, inc in next stitch] 6 times. (24 sts)
5. Fasten off and mark four consecutive non-overlapping six-stitch groups around the 24-stitch perimeter. For each point, join cream into the first stitch of one unused group. Point Row 1: sc once in each of those six old center stitches; ch 1 and turn. (6 sts)
6. Row 2: Sc in each stitch. (6 sts)
7. Row 3: Sc2tog, sc in next 2 stitches, sc2tog; ch 1 and turn. (4 sts)
8. Row 4: Sc in each stitch. (4 sts)
9. Row 5: Sc2tog twice; ch 1 and turn. (2 sts)
10. Row 6: Sc in each stitch. (2 sts)
11. Row 7: Sc2tog; fasten off. (1 sts)
12. Work the same point sequence into each of the remaining three groups. Do not chain a new foundation and do not share a center stitch between adjacent points. The result has four points rather than four straight square sides.
13. For mint edging, surface-slip-stitch along the outer contour through existing edge loops with loose tension. This overlay adds no structural stitches and must not cinch the points. Secure both ends within the cloth.

Make Arms and Assemble the Lovey

1. Bunny arm Round 1: 6 sc into a magic ring. (6 sts) Tighten the ring, mark the first sc, and work a continuous spiral without joining or turning.
2. Round 2: inc in each stitch. (12 sts)
3. Rounds 3-6: Sc in each stitch. (12 sts)
4. Round 7: dec 6 times. (6 sts)
5. Make two blush arms. Add only a wisp of stuffing in the rounded tips. Flatten the final six stitches into three opposing pairs and close the complete edge. Sew the broad edge of each arm to the sides of the head between Rounds 11 and 14.
6. Place the head at the exact center of the star cloth with one point front, one back and two sideways. Sew a broad 12-stitch-diameter circle through head fabric near its lower pole and cloth center Rounds 2-3. Make a second pass and inspect from the underside; no stuffing or long loops may show.
7. This is a supervised-use comfort cloth, not a sleep-space item. Check ears, mint insets, arms, head attachment and edging before handing it to a child.

Assembly and Shaping

The flat star cloth stays unstuffed. The stuffed pink head sits over its 24-stitch center; ears and arms attach to the head, not to isolated point tips. Mint inner ears and surface edge are fully sewn or anchored.

Lay every component on a flat surface before joining. Match the marked centers first, then divide each remaining edge into equal sections. Work through both layers with consistent tension and pause after each section to check that the fabric lies flat. This measured approach prevents twisting and keeps decorative details facing the intended direction.

Finishing

1. Before closure, check every part against its stated last-round count and place a small amount of washable filling where directed.
2. Sew full contact edges, then make a second reinforcing pass. Secure and bury ends through at least three fabric paths.
3. Remove pins and markers. Pull-test all attachments, check for exposed filling, and inspect again after washing according to the yarn label.

For a polished result, weave each tail through several same-color stitches, reverse direction once, and trim only after the fabric has been gently stretched. Block to the listed dimensions without flattening textured stitches. Inspect joins, borders, straps, and decorative pieces before the project is used or gifted.

Helpful Tips

• A marker at each repeat boundary makes increases and decreases easier to count.
• Make paired pieces together and compare before sewing.
• If stuffing shows through, redo the affected section with a smaller hook rather than covering gaps with embroidery.

Good lighting and a contrasting stitch marker make counting much easier. If a section looks uneven, compare the current count with the previous checkpoint before continuing. Fixing one missed stitch early is faster than compensating later, and it preserves the measurements used by the assembly instructions.

Frequently Asked Questions

Is this copied from the reference image?

No. The reference controls the visual brief only. The instructions and counts here are an independent BabyYarnie construction.

Was a physical sample tested?

No physical sample is claimed. Numerical stitch validation does not establish actual fit, fabric drape, yarn quantity or child safety; make a swatch and trial assembly.

Can I use hard safety eyes?

For the safest gift presentation, use securely embroidered eyes and avoid hard or detachable small parts.

Conclusion

Record your actual yarn, hook and finished measurement. Compare the completed silhouette with the design brief, then inspect every seam and embroidered feature before gifting or display.

BabyYarnie Printable Crochet Pattern Card

BabyYarnie — easy-to-follow crochet for everyday makers.

Project: Crochet Four-Point Bunny Star Lovey

Skill level: Intermediate   Hook: 3.5 mm for DK cotton; adjust for dense head fabric   Yarn: DK cotton

Finished size: Planning 15-17 in from top ears to lower star point; flat cloth about 13 in tip to tip

Card Materials

• Planning allowance: 125 yd cream, 70 yd blush pink and 35 yd mint DK cotton plus swatch allowance
• 3.5 mm hook, small amount of washable stuffing for head and arms, black embroidery yarn
• Blunt needle, removable markers, scissors and ruler; no buttons or plastic eyes

Card Instructions

1. Shape the Bunny Head and Face: Pink head grows to36, five even rounds, decreases to6 and closes.
2. Make and Line Two Ears: Two tapered pink ears with fully sewn 4-sc-by-6-row mint insets.
3. Crochet the Four-Point Cream Cloth: Cream center 6,12,18,24; four points each narrow 6,6,4,4,2,2,1; mint surface edge.
4. Make Arms and Assemble the Lovey: Two closed arms; head sewn over cream star center in a broad reinforced circle.

Finish: Check every count, weave in all ends, block to measurement, and inspect each join.