This original BabyYarnie crochet nursery cloud and stars wall hanging is designed independently as a practical crochet baby project with explicit stitch counts, measured checkpoints, and clear finishing. The instructions use US terms and keep every construction decision visible so the finished piece can be checked before use or gifting.
The cloud is shaped in counted turned rows, edged with rounded lobes, and mounted flat. Three identical five-point stars are crocheted separately, blocked, and attached in an 8-, 11-, and 14-inch staggered layout.
Why You’ll Love This Project
The construction is repetitive enough for a relaxed crochet session while the measured checkpoints help prevent size drift. A washable, smooth yarn keeps the stitches easy to inspect and gives the finished baby project a soft, tidy appearance.
Materials
- Approximately 260 yards DK cotton yarn in cream
- Approximately 70 yards DK cotton yarn in muted gold
- Approximately 45 yards DK cotton yarn in sage
- 3.5 mm crochet hook
- One smooth 12-inch wooden dowel, 3/8 inch diameter
- Six locking stitch markers
- Tape measure
- Yarn needle
- Scissors
Gauge, Measurements, and Planning
The blocked 34-stitch center of the cloud should measure about 7.5 inches before the rounded edging. Block all three stars to the same 3-inch point-to-point size before assembly.
Make and wash a gauge swatch before beginning. Measure only after the swatch is completely dry. If the stitch width differs, change hook size rather than pulling the working yarn tighter. Keep a written count at the end of every section so the finished edges remain balanced and the assembly points line up.
Abbreviations and Special Stitches
- ch: chain
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- sl st: slip stitch
- st(s): stitch(es)
- rnd: round
- sc2tog: single crochet two together
Special stitch guidance: Star point: sl st in the next center stitch, ch 5, then work sl st in second chain, sc in next chain, hdc in next chain, dc in final chain, and sl st in the following center stitch. Repeat five times around the 10-stitch center.
Important Notes
- This is a decorative nursery wall hanging only.
- Keep cords and hanging decorations securely installed and out of reach of babies and young children.
- Do not hang above a crib, changing surface, play area, or anywhere a child could pull it down.
- Beginning chains do not count as stitches; turn after every cloud row.
- Use sewn yarn joins only—no beads, bells, buttons, glue-only attachments, or loose embellishments.
Complete Instructions for Crochet Nursery Cloud and Stars Wall Hanging
Crochet the Shaped Cloud
Work the cloud flat in cream and keep increases symmetrical.
- Cloud Row 1: Ch 25. Sc in the second chain and across. Turn. (24 sts)
- Cloud Rows 2–6: Ch 1, work 2 sc in first stitch, sc across, and 2 sc in final stitch. Counts: 26, 28, 30, 32, then 34 stitches.
- Cloud Rows 7–12: Ch 1, sc in every stitch, and turn. (34 sts)
- Cloud Rows 13–17: Ch 1, sc2tog, sc across to final 2 stitches, sc2tog, and turn. Counts: 32, 30, 28, 26, then 24 stitches.
- Sc around the complete shape. Across the upper and side edge only, alternate groups of 5 dc and 7 dc between single-crochet anchors to form rounded cloud lobes; keep the lower edge straight.
Make Three Five-Point Stars
Make three identical stars in muted gold.
- Star Center Rnd 1: Make 10 sc in a magic ring and join without turning. (10 sts)
- Work the star-point sequence five times, using two center stitches for each point.
- Fasten off, weave tails toward the center, and block each star to approximately 3 inches point to point.
- Confirm that all five points on every star are secure and that the three motifs match in size.
Assemble the Hanging Layout
Arrange every component on a flat surface before sewing.
- Cut three sage crochet chains that measure 8, 11, and 14 inches after gentle stretching; fasten off both ends securely.
- Sew one cord to the top point of each star and attach the opposite ends evenly across the straight lower cloud edge.
- Make two 3-inch cream mounting loops and sew them to the cloud’s upper back, 7 inches apart. Slide both loops onto the 12-inch dowel.
- Add a short closed hanging loop between the dowel ends, install on a wall-rated hook, and complete a firm pull test before display.
Assembly and Shaping
Center the 11-inch star cord beneath the cloud and position the 8- and 14-inch cords equally to either side. Sew through several cloud edge stitches for every join, reverse direction, and knot invisibly on the back.
Lay every component on a flat surface before joining. Match the marked centers first, then divide each remaining edge into equal sections. Work through both layers with consistent tension and pause after each section to check that the fabric lies flat. This measured approach prevents twisting and keeps decorative details facing the intended direction.
Finishing
- Block the cloud flat to 11 × 6 inches and each star to 3 inches before assembly.
- Weave every tail through several stitches and reverse direction once.
- Pull-test all six cord attachment points, both dowel loops, and the wall hook.
- Display only as decorative wall art securely installed beyond the reach of babies and children.
For a polished result, weave each tail through several same-color stitches, reverse direction once, and trim only after the fabric has been gently stretched. Block to the listed dimensions without flattening textured stitches. Inspect joins, borders, straps, and decorative pieces before the project is used or gifted.
Helpful Tips
- Use cotton for crisp star points and a cloud that blocks flat.
- Pin the full 8-, 11-, and 14-inch layout on a blocking mat before sewing.
- Change the cord lengths while preserving a staggered arrangement and safe total clearance.
- Photograph the finished installation and include the safety guidance when gifting.
Good lighting and a contrasting stitch marker make counting much easier. If a section looks uneven, compare the current count with the previous checkpoint before continuing. Fixing one missed stitch early is faster than compensating later, and it preserves the measurements used by the assembly instructions.
Frequently Asked Questions
Can this wall hanging go above a crib?
No. Install it well away from cribs, changing tables, play areas, and any place where a child could reach the cords or pull down the hanging.
How many stars are included?
The pattern includes three identical five-point stars suspended at three measured lengths.
Can I add beads or bells?
No. Keep the decoration flat and sewn, without small hard parts or loose embellishments.
Conclusion
The finished nursery wall hanging combines one softly shaped cloud, three matching five-point stars, and a balanced staggered display. Secure sewn joins and explicit out-of-reach installation guidance keep its purpose clearly decorative.
BabyYarnie Printable Crochet Pattern Card
BabyYarnie — easy-to-follow baby crochet for everyday makers.
Project: Crochet Nursery Cloud and Stars Wall Hanging
Skill level: Intermediate Hook: 3.5 mm Yarn: DK
Finished size: Cloud about 11 × 6 inches; complete hanging about 15 inches wide × 24 inches long
Card Materials
- Approximately 260 yards DK cotton yarn in cream
- Approximately 70 yards DK cotton yarn in muted gold
- Approximately 45 yards DK cotton yarn in sage
- 3.5 mm crochet hook
- One smooth 12-inch wooden dowel, 3/8 inch diameter
- Six locking stitch markers
- Tape measure
- Yarn needle
- Scissors
Card Instructions
- Crochet the Shaped Cloud: Shape the cream cloud from 24 to 34 stitches and back to 24, then add rounded upper lobes and a straight lower edge.
- Make Three Five-Point Stars: Make three identical 10-stitch centers and add five crocheted points to each star.
- Assemble the Hanging Layout: Suspend three stars on 8-, 11-, and 14-inch cords, mount the cloud to a 12-inch dowel, and securely install it out of children’s reach.
Finish: Check every count, weave in all ends, block to measurement, and inspect each join.
